Custom Square & Rectangle
Glass Table Tops, Cut to Size
Precision square and rectangle glass table tops fabricated to your exact length and width — choose tempered or non‑tempered glass, corner style, edge finish, and thickness. Hand‑finished in Orange County with over 25 years of glass craftsmanship.
Save On Your Custom Table Top
Order directly through our website and save — the discount depends on how you'd like to receive your order.
Order online — save 15% instantly at checkout.
CODE: 15DIRECTPURCHASEChoose the pickup option at checkout and save even more — 25% off your order.
CODE: 25PICKUPGLASSA square or rectangle table top made for your exact table — not the other way around
Every square or rectangle table top we cut is fully custom to your length and width. Tell us your dimensions, thickness, corner style, and edge finish, and we fabricate it in‑house, polish the edges by hand, and pack it for safe delivery or local pickup in Orange, CA.
Whether you're protecting a wood dining or conference table, topping a desk, or finishing a custom base, we'll walk you through choosing between tempered and non‑tempered glass so the table top fits both your look and how it'll actually be used.
- Custom length & width up to 96" on the long side
- Thickness options: 3/16", 1/4", 3/8", 1/2", and 3/4"
- Eased or rounded (radius) corners available
- Choice of Flat Polish, Bevel, Pencil, or Double Beveled edge
- Tempered or non‑tempered (annealed) glass available
Tempered vs. Non‑Tempered Square & Rectangle Glass
Both are cut and beveled the same way — the difference comes from how the glass is heat‑treated afterward, which changes its strength, safety, and best use.
Tempered Glass
Heat‑treated for strength & safety
- ✓Up to 4x stronger than standard annealed glass of the same thickness
- ✓Breaks into small, dull‑edged pebbles instead of sharp shards if it ever fails
- ✓More resistant to thermal stress — safe for patio & outdoor tables
- ✓Required by code for many commercial, office, and public settings
- ✓Best for large surfaces, corners, and tables with kids, pets, or heavy daily use
- ✓Cannot be re‑cut or drilled after tempering — sizing must be exact up front
Non‑Tempered Glass
Standard cut & polished glass
- ✓Same clean cut and hand‑polished edge as tempered
- ✓More budget‑friendly for light‑use, indoor surfaces
- ✓Good fit for decorative or low‑traffic table tops
- ✓Can be modified after fabrication if needed
- ✗Breaks into large, sharp shards on impact — more risk on exposed corners
- ✗Not recommended for outdoor, commercial, or high‑traffic use
Every Square & Rectangle Table Top, Built Custom
Send us your length and width and we handle cutting, edging, and polishing in‑house.
Pick Your Edge Style
Available on both tempered and non‑tempered square and rectangle table tops.
Flat Polish
A clean, smooth square edge — subtle and minimal.
Beveled
An angled edge that catches the light for a classic, elegant look.
Double Beveled
A double beveled angled edge that catches the light for a classic, elegant look.
Gemstone Edge
A decorative double chipped‑profile edge for a traditional, antique formal finish.
Square Corners or Softened Radius Corners
Rectangle and square tops can be finished either way — radius corners are a popular safety upgrade for family homes and offices.
Eased Corners
Crisp 1/8" corners for a safe clean, traditional table top look.
1/2" Radius
A subtle rounded corner that softens the silhouette slightly.
1" Radius
A noticeably rounded corner — a common choice around kids and pets.
Custom Radius
Tell us the exact corner radius your project calls for.
Built For However You'll Use It
Dining & Conference Tables
Protect wood finishes on long rectangle tables with a precise custom fit.
Desks & Office Tops
A smooth, protective surface sized exactly to your desk or workstation.
Patio & Outdoor Tables
Tempered glass handles sun, temperature swings, and outdoor wear.
How To Measure Your Table
Getting an accurate length and width up front keeps your order on schedule.
Measure Length & Width
Measure the longest and widest points of the surface, corner to corner, in inches.
Choose Corner Style
Decide between square corners or a radius, and note the radius size if rounded.
Pick Thickness, Edge & Glass Type
Select your thickness, edge finish, and tempered or non‑tempered glass, then send it our way.
Square & Rectangle Table Top FAQ
Do I need tempered glass for my table?
If the table is outdoors, used commercially, sits in an office, or will see kids, pets, or heavy daily use, we recommend tempered — the exposed corners on a rectangle top are also safer if the glass ever breaks. For a low‑traffic indoor accent table, non‑tempered can be a good, more affordable option.
Can I get radius (rounded) corners instead of eased?
Yes — let us know your preferred corner radius (1/2", 1", or custom) when you order and we'll cut it to match.
Can tempered glass be re-cut or drilled after ordering?
No. Once glass is tempered it cannot be cut, drilled, or altered — that's why we confirm your exact length, width, and corner style before tempering.
How do I order a custom size?
Contact us with your length, width, thickness, corner style, edge finish, and glass type (tempered or non‑tempered), and we'll send a free quote and timeline.
How do I use the promo codes?
Enter 15DIRECTPURCHASE at checkout for 15% off any direct website order with shipping, or 25PICKUPGLASS for 25% off when you select local pickup in Orange, CA.
Ready for your custom square or rectangle table top?
Send us your length, width, thickness, and glass preference — we'll get back to you with a free quote. Don't forget your promo code at checkout.